Parts & Accessories
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
Light & Motion's 11.1v 3-cell Li-ion Battery is nice and small and it's lithium-ion technology means impressive run times, while its gossamer weight of only 180 grams means it's easy to carry in a pocket or packs. It also comes with a convenient mounting strap.
Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Light & Motion's 7.4v 2-cell Li-ion Battery is compact and lightweight to power your light without weighing you down. It slips into a jersey pocket or pack or attaches to your bike via the convenient integrated rubber strap.
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight
The ultimate mounting solution for the Vibe Pro Taillight. Securely mount Vibe to seat rails placing rear lighting at the highest part of the bike - optimum for visibility to motorists. Innovative design allows the Vibe to be adjusted in multiple angles for ideal placement. Additionally this mount solves common mounting issues when using an aero post, trunk bag, etc. Features - Higher mounting point increases rear visibility - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Optimized for the Vya Pro Taillight for a sleek mounting orientation. The standard Vya Taillight is compatible but may interfere with accessories such as a seat bag
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote. The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm. - CNC alloy design provides light and stable mount - Allows for infinite angle adjustment - Compatible with 31.8mm - 22.2mm bars - For use with Transmitr Wireless Remote
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash
Direct replacement for the mount on Taz lights. The simple but thoughtfully designed system cinches light to the bar to prevent movement in bumpy terrain. - Two different rubber mount pads included to achieve the perfect fit depending if the handlebar is standard or oversize - Includes strap and mounting hardware
- Versatile LED and accessories forward mount - Multiple mounting options - Composite matrix construction with aluminum arms - Bolts directly to stem faceplate - Includes mounting hardware. (Stem mount, 2x mount arm, 2x length 30MM/35MM length to match most stems, spacers, screw set) - Suitable for most Lezyne most E-Bike front light (Macro, Power, Power Pro, Micro, Hecto)
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Page 1 of 3 Next page