An expanded and evolved set of our finest professional level shop tools that addresses the changing tool demands of modern bikes and their mechanics. The PK-3 includes over 70 of our best tools and was put together with versatility in mind. A great way to outfit a pro bench or to set up a fabulous home workshop, the PK-3 is an impressive set of tools that can help you perform hundreds of repairs and maintenance tasks. Kit Includes: ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm BBT-5/FR-11 Bottom Bracket/Cassette Lockring Tool for Campagnolo (12-tooth) BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive BCB-4.2 Bike Cleaning Brush Set BO-2 Bottle Opener CBW-1 Open End Wrench: 8/10mm CBW-4 Open End Wrench: 9/11mm CC-3.2 Chain Checker CCP-22 Crank Puller for Square Taper Cranks CCP-44 Crank Puller for Splined Cranks CM-5.2 Cyclone Chain Scrubber CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1 Chain Whip Pliers CT-3.2 Chain Tool DAG-2.2 Derailleur Hanger Alignment Gauge DCW-1 Double Ended Cone Wrench: 13/14mm DCW-2 Double Ended Cone Wrench: 15/16mm DCW-3 Double Ended Cone Wrench: 17/18mm DH-1 Dummy Hub DP-2 Threaded Dummy Pedal FR-5.2 Cassette Lockring Tool: Shimano, SRAM, Sun Race GP-2 Pre-Glued Super Patch Kit HCW-15 36mm/32mm Headset Wrench HMR-8 Shop Hammer HT-8 8mm Hex Tool MLP-1.2 Master Link Pliers NP-6 Needle Nose Pliers OBW-4 Offset Brake Wrench OM-1 Overhaul Mat PAW-12 12" Adjustable Wrench PH-1.2 P-Handle Hex Wrench Set PW-4 Professional Pedal Wrench RR-12 Tape Measure SBC-1 Spoke, Bearing and Cotter Gauge SCW-13 13mm Shop Cone Wrench SCW-14 14mm Shop Cone Wrench SCW-15 15mm Shop Cone Wrench SCW-16 16mm Shop Cone Wrench SCW-17 17mm Shop Cone Wrench SCW-18 18mm Shop Cone Wrench SCW-19 19mm Shop Cone Wrench SD-SET Shop Screwdrivers (Set of 4) SP-7 Side Cutter Pliers SW-0 Precision Spoke Wrench: .127" SW-1 Precision Spoke Wrench: .130" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TB-2 Emergency Tire Boots TL-1.2 Tire Lever Set TL-4.2 Tire Lever Set TWS-1 Torx Compatible Wrench Set
The standard of the bike industry for over 40 years, the PRS-2.2-2 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Built from heavy-gauge oversized steel tubing, then chrome plated for years of carefree use. NOTE: The PRS-2.2 does not include base. Order #135 Steel Plate Base or FP-2 Floor Mounting Plate. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Easily height adjustable to five positions from 50" to 62" (128cm to 158cm) using our proven lock block system with locking pin - The maximum weight holding capacity of the PRS-2.2 is 120 lbs. (54kg) - Includes #105 cast aluminum work tray
The standard of the bike industry for over 40 years, the PRS-2.2 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Built from heavy-gauge oversized steel tubing, then chrome plated for years of carefree use. NOTE: The PRS-2.2 does not include base. Order #135 Steel Plate Base or FP-2 Floor Mounting Plate. - Shop quality 100-3C Clamps (2) quickly adjust to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Easily height adjustable to five positions from 50" to 62" (128cm to 158cm) using our proven lock block system with locking pin - The maximum weight holding capacity of the PRS-2.2 is 120 lbs. (54kg) - Includes #105 cast aluminum work tray
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case
Built to withstand the rigors of every day shop use, Park Tool's updated Single Arm Professional Work Stand is the stand of choice for professional mechanics around the world. • Easily height adjustable from 50" to 62" (128-158cm) utilizing Park's proven Lock Block System • Includes #105 cast aluminum work tray • The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8” to 3” (23-76mm), including aero tubes Notes: • The maximum weight holding capacity of the PRS-3.2 is 68 kg (150 lb) • Stand does not include base. Order part #130 base. • To mount directly to floor use part #FP-2 Floor Mounting Plate Differences from the PRS-3OS: • Utilizes lock block system which allows easy and fast height adjustment and a more solid connection between the two upright tubes • Also includes a new height adjustment pin which locks into place for safety and so it won't be lost.
Built to withstand the rigors of every day shop use, Park' updated Single Arm Professional Work Stand is the stand of choice for professional mechanics around the world. • Easily height adjustable from 50" to 62" (128-158cm) utilizing Park's proven Lock Block System • Includes #105 cast aluminum work tray • Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) Notes: • The maximum weight holding capacity of the PRS-3.2 is 68 kg (150 lb.) • Stand does not include base. Order part #130 base • To mount directly to floor use part #FP-2 Floor Mounting Plate Differences from the PRS-3OS: • Utilizes lock block system which allows easy and fast height adjustment and a more solid connection between the two upright tubes • Also includes a new height adjustment pin which locks into place for safety and so it won't be lost
The next generation of wheel truing stands! The TS-4 is made to accurately gauge any size wheel, with or without the tire installed. The TS-4 has many of the same features as Park Tool's famous TS-2.2 with some additional attributes to accommodate today’s wide variety of hub, wheel and tire combinations. - Both uprights move simultaneously to always keep wheel centered in the stand. - Accommodates axle widths from 75mm to 215mm - Direct action caliper arm adjusts to work with wheel sizes from 16" to 29"+ - Accommodates tire widths up to 5" with or without brake rotor mounted - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Precise accuracy, operation and adjustability - Built in thru-axle adaptors - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims - Dial Indicator compatible (TS-2Di) (Sold separately) - Rotor gauge compatible (DT-3 & DT-3i.2) (Sold separately)
- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations
Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.
115 pound (52kg) base plate with floor levelers for the PRS-33 Power Lift Shop Stand
The Park Tool 758.2 will ream and face the head tubes of bike using the 1.5" standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750.2 Centering Cone Adaptor.
Designed specifically for the home mechanic who wants the best, the AK-3 Advanced Mechanic Tool Kit is a special collection of Park's finest tools, all housed in a tough toolbox. The AK-3 includes over 40 tools to work on a wide variety of current model bikes. A great set of tools a mechanic should not be without. Kit Includes: BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20-Notch Shimano and ISIS Drive BO-2 Bottle Opener CC-3.2 Chain Checker CM-5.2 Cyclone Chain Scrubber CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CT-3.2 Chain Tool CWP-7 Compact Crank Puller DCW-1 Double Ended Cone Wrench: 13/14mm DCW-2 Double Ended Cone Wrench: 15/16mm DCW-3 Double Ended Cone Wrench: 17/18mm FR-5.2 Cassette Lockring Tool GP-2 Pre-Glued Super Patch Kit GSC-1 GearClean Brush HXS-1.2 Professional L-Shaped Hex Wrench Set MLP-1.2 Master Link Pliers PAW-12 12" Adjustable Wrench PW-5 Home Mechanic Pedal Wrench RR-12 Tape Measure SD-2 #2 Phillips Screwdriver SD-3 3mm Flat Blade Screwdriver SR-12 Chain Whip 5- to 12-Speed Compatible SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" TB-2 Emergency Tire Boots TL-1.2 Tire Lever Set TWS-3 Torx Compatible 3-Way Wrench #349 Soft Bristle Soaping Brush
Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately). • 23" x 35" x 7/16" steel plate • Approximately 118 lbs • Black painted
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
Park's TS-2.2 Professional Truing Stand has been a staple in bike shops for decades because it's so reliable and easy to use. It accepts all common wheel diameters up to 29 inches with and without tires. It’s made of heavy chrome-plated steel with nylon bushings at pivot points and can be bench-mounted, vise-held or attached to Park's Tilting Base (sold separately). The best feature is that this stand automatically centers rims over the hubs, which saves time repairing and building wheels. Also, installing the wheel and positioning the caliper for truing is quick and easy thanks to the stand's separate knobs for each setting. This is an awesome truing stand that will last a lifetime.
Keep your precious bicycle tools safe and secure when traveling to cycling events with Park's Blue Box Tool Case. It boasts a dent-proof composite shell supported by a tough, light aluminum frame. Inside are removable tool boards made with durable 600D ballistic nylon sewn to an ABS inner panel. You get 35 tool pockets and straps that accommodate a wide variety of tools. Plus, there's a lower compartment with adjustable partitions so you can customize your layout. The front board also detaches and hangs off the outside of the case so you can set up your full shop and see and access all your tools at once. And, since tools have that terrible tendency to wander when traveling, the Blue Box is lockable with both a combination and a key.
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life
Park Tool's Powder Coated Professional Wheel Truing Stand has all the same features of Park's world famous, chrome plated TS-2.2 truing stand in a more economical, powder-coated version. • Uprights accept wheels up to 29” with or without tire • Tall, accurate calipers accept rim widths up to 4” • Accepts hub widths up to 175mm • Powder-coated heavy gauge steel • Strong, comfortable knobs • Removable/replaceable composite caliper tips protect painted rims • Uprights move simultaneously to accommodate front and rear wheels • Spring-loaded calipers and caliper arm prevent binding • Smooth, accurate operation
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
The BBP-1 quickly and accurately installs bottom bracket bearings into press fit-type bottom bracket shells. - Quick release design for fast tool installation and removal - 12 precision-machined bushings (in 6 sizes) to fit these bottom bracket configurations: - 386EVO, BB30, BB86, BB90, BB92, BB95, BB121, BMX Mid, BMX Spanish, OSBB, PF41, Press Fit 24, Press Fit GXP, BBright Direct Fit, PF30 BBright Press Fit, Shimano Press Fit - Works on bottom bracket shell widths from 68mm to 150mm
For all your bicycle repairs, choose Park's Home-Mechanic Repair Stand! This great stand is always at the ready with fast and easy set-up and take down. The sophisticated cam-type clamp allows single-action clamping of tubes 7/8 to 3 inches in diameter, and the clamping pressure is fully adjustable to prevent frame damage. You'll love the smooth 360-degree rotation while the quick-release height adjustment (39 to 57 inches) makes this stand perfect for any height rider. Plus, this fine stand folds down to 41 inches for portability and easy storage.
Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted
After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments
$142.95 - $173.95
Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.
$142.95 - $167.95
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas like on seatposts that aren't raised much. This stand rotates 360 degrees for optimum bike positioning, too.
Page 1 of 11 Next page